Stainless steel deep groove ball bearings are used in wet and other corrosive media environments. Stainless steel deep groove ball bearings have the same groove shape and excellent adhesion to steel balls as standard deep groove ball bearings made of high carbon chromium bearing steel. They are primarily subjected to radial loads and can also withstand biaxial loads.

Stainless steel deep groove ball bearing ring material is made of stainless steel X65Cr14, conforms to ISO683-17:2000 standard or stainless steel X105CrMo17 meets EN10088-1:995 standard; steel ball is made of X105CrMo17 stainless steel, conforms to EN10088-1:995 standard; cage and The dust cover is made of X5CrNi18-10 stainless steel and complies with the EN10088-1:1995 standard.

Stainless steel deep groove ball bearings range in diameter from 1 to 50 inch, open and sealed, or flanged. Sealed bearings are mainly made of products with dust caps on both sides. The tolerances and radial clearances of stainless steel deep groove ball bearings are the same as for ordinary deep groove ball bearings.

The Precision deep groove ball bearing with dust cover is suffixed with 2Z and the dust cover is also printed with stainless steel. The dust cover forms a narrow gap with the inner and outer diameters of the inner ring and can withstand high temperatures and high rotational speeds. Bearings with inner ring are mainly used when the inner ring rotates. If the outer ring rotates, the grease will leak.